Have. When a certain bai shock absorber is damaged, the corresponding wheel is equivalent to no shock absorber or the shock absorberChina Motorcycle qili shock absorption damping factory is too soft, so the damping effect of the body will be greatly reduced, the most obvious manifestation is excessive bumpy road or slowing down When strapped, the wheel made a "boom" noise.

At the same time, the adhesion between the wheel and the ground is reduced. When encountering bumpy road conditions or cornering, the wheel will leave the ground, and the car is in danger of losing control. Therefore, after the shock absorber leaks, the driving speed of the car should be reduced. , Especially the speed when cornering; there is also that the car's body roll will increase when cornering, and sideslip will occur in severe cases.
Extended information:
The main function of the automobile shock absorber is to suppress the shock and the impact from the road surface when the spring rebounds after shock absorption. When a car passes on an uneven road, although the shock-absorbing spring can filter the vibration of the road, the spring itself will reciprocate, and the shock absorber is used to suppress the jump of this spring. Therefore, the shock absorber is damping the spring, not the body.
In addition, when replacing the shock absorber, the shock absorber of the two wheels on the same axis is generally replaced at the same time. Otherwise, the damping effects of the two shock absorbers are different, which will lead to inconsistent steering feel of the car, and inconsistent roll of the car body. It will not only affect the comfort of the ride, but also affect the handling of the car. It is difficult to control when changing lanes, overtaking, or cornering at high speed, which increases the risk of driving.
Therefore, don't try to save money, just replace the damaged shock absorber. In addition, parts related to wheel alignment will be disassembled when replacing the shock absorber, so a four-wheel alignment is required to prevent wheel alignment from being inaccurate.