This shock absorber can be disassembled bai, not easy to disassemble. It's even more strenuous to get up, du guess you won't go back. I advise you not to disassemble the screw and buy a replacement with the same dao model. It's much easier to remove the screws. It's easy to use a hand-grinding wheel, or a fresh saw.

From the perspective of the material that produces damping, the shock absorber Absorber is divided into two types: hydraulic and pneumatic. There is also a variable damping shock absorber.

The shock absorber is mainly used to suppress the shock and the impact from the road surface when the spring rebounds after absorbing the shock. When passing on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will have reciprocating motion, and the shock absorberMotorcycle Front Shock Absorber is used to suppress the jump of this spring.

If the shock absorber is too soft, the body will jump up and down. If the shock absorber is too hard, it will bring too much resistance and prevent the spring from working properly. In the process of refitting the suspension system, hard shock absorbers should be matched with hard springs, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder shock absorbers.

The device connected with the vibration-inducing crankshaft is used to counteract the torsional vibration of the crankshaft, that is, the phenomenon that the crankshaft is twisted by the impact of the ignition of the cylinder.