1. Depending on the type of vehicle, if it is a general 125 or 150 straddle bike, the front shock absorption oil volume is about 120-150 ml. If it is a larger prince or street sports car, the oil volume can reach 170 ml. If it is a curved beam or scooter, it is generally below 100 ml.ATV shock absorption series factory
2. Twist the inner six-corner screws on the bottom of the shock absorber with the inner six-corner wrench. After twisting out, remove the shock absorber, drain the oil, and use a screwdriver to remove the outer oil seal. Then use a small screwdriver to remove the clips blocking the oil seal, and then use a screwdriver to crazyly remove the oil seal.
Third, then install the oil seal, the clip outside the oil seal. Use the inner hexagonal wrench to help the inner hexagonal screw to prevent the oil from leaking. Generally, there is a bottle of oil for the shock absorber.